Cross Nuts
Cross Nuts
The Cross Nut has been designed to provide the ultimate pull out strength in thin sheet metals and plastic. Its slotted body splits into four legs providing a wide load-bearing surface on the backside of the parent material. The Cross Nut also features the widest grip range of any blind threaded nut. A grip ID mark is included on the head of the fastener for grip range identification.
Class 2B or Metric Class 6H threads
Steel C1010-1008
Cadmium plating per QQ-P-416
All Dimensions Shown In Inches
| d | e | H | D | E | B | L | L2 | ||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Grip Range | Hole Size | Body Diameter Max. | Head Height Ref. | Head Diameter Ref. | Overall Length Ref. | Installed Length Ref. | Product Code | |
| Min. | Max. | ||||||||
| 6-32 | 0.020-0.150 | 0.209 | 0.214 | 0.208 | 0.032 | 0.438 | 0.688 | 0.335 | S6P150 |
| 6-32 | 0.150-0.270 | 0.209 | 0.214 | 0.208 | 0.032 | 0.438 | 0.797 | 0.335 | S6P270 |
| 8-32 | 0.020-0.150 | 0.242 | 0.247 | 0.241 | 0.038 | 0.438 | 0.694 | 0.340 | S8P150 |
| 8-32 | 0.150-0.270 | 0.242 | 0.247 | 0.241 | 0.038 | 0.438 | 0.819 | 0.340 | S8P270 |
| 10-32 | 0.020-0.175 | 0.273 | 0.278 | 0.272 | 0.038 | 0.500 | 0.819 | 0.425 | S10P175 |
| 10-32 | 0.175-0.320 | 0.273 | 0.278 | 0.272 | 0.038 | 0.500 | 0.959 | 0.425 | S10P320 |
| 1/4-20 | 0.020-0.280 | 0.347 | 0.352 | 0.346 | 0.058 | 0.625 | 1.058 | 0.505 | S25P280 |
| 1/4-20 | 0.280-0.500 | 0.347 | 0.352 | 0.346 | 0.058 | 0.625 | 1.292 | 0.505 | S25P500 |
| 5/16-18 | 0.020-0.280 | 0.438 | 0.443 | 0.437 | 0.062 | 0.750 | 1.203 | 0.570 | S31P280 |
| 5/16-18 | 0.280-0.500 | 0.438 | 0.443 | 0.437 | 0.062 | 0.750 | 1.437 | 0.570 | S31P500 |
| 3/8-16 | 0.020-0.280 | 0.515 | 0.522 | 0.514 | 0.088 | 0.875 | 1.306 | 0.605 | S37P280 |
| 3/8-16 | 0.280-0.500 | 0.515 | 0.522 | 0.514 | 0.088 | 0.875 | 1.525 | 0.605 | S37P500 |
All Dimensions Shown In Millimeters
| d | e | H | D | E | B | L | L2 | ||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Grip Range | Hole Size | Body Diameter Max. | Head Height Ref. | Head Diameter Ref. | Overall Length Ref. | Installed Length Ref. | Product Code | |
| Min. | Max. | ||||||||
| M4x0.7 | 0.50-3.80 | 6.13 | 6.25 | 6.12 | 0.96 | 11.1 | 17.6 | 8.6 | SM4P3.80 |
| M4x0.7 | 3.80-6.85 | 6.13 | 6.25 | 6.12 | 0.96 | 11.1 | 20.8 | 8.6 | SM4P6.85 |
| M5x0.8 | 0.50-4.45 | 7.48 | 7.62 | 7.47 | 0.96 | 12.7 | 22.0 | 9.9 | SM5P4.45 |
| M5x0.8 | 4.45-8.10 | 7.48 | 7.62 | 7.47 | 0.96 | 12.7 | 24.8 | 9.9 | SM5P8.10 |
| M6x1.0 | 0.50-7.10 | 8.80 | 8.93 | 8.79 | 1.50 | 15.9 | 26.9 | 12.8 | SM6P7.10 |
| M6x1.0 | 7.10-12.70 | 8.80 | 8.93 | 8.79 | 1.50 | 15.9 | 32.8 | 12.8 | SM6P12.70 |
| M8x1.25 | 0.50-7.10 | 11.11 | 11.50 | 11.10 | 1.57 | 19.0 | 30.5 | 14.5 | SM8P7.10 |
| M8x1.25 | 7.10-12.70 | 11.11 | 11.50 | 11.10 | 1.57 | 19.0 | 36.5 | 14.5 | SM8P12.70 |
| M10x1.50 | 0.50-7.10 | 13.07 | 13.26 | 13.06 | 2.24 | 22.2 | 33.2 | 15.8 | SM10P7.10 |
| M10x1.50 | 7.10-12.70 | 13.07 | 13.26 | 13.06 | 2.24 | 22.2 | 38.7 | 15.8 | SM10P12.70 |
Cross Nut Pre-Bulbed
The Cross Nut Pre-Bulbed has been designed to be installed using torque controlled hand or power tools. A simple torque hand tool can be packaged with this fastener for customer installation. Use of the C 350 power tool can install this fastener in variable thickness plastic materials such as those produced by rotational or blow molding. A grip ID mark is included on the head of the fastener for grip range identification.
All Dimensions Shown In Inches
| d | e | H | D | E | B | L | L2 | ||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Grip Range | Hole Size | Body Diameter Max. | Head Height Ref. | Head Diameter Ref. | Overall Length Ref. | Installed Length Ref. | Product Code | |
| Min. | Max. | ||||||||
| 10-32 | 0.020-0.175 | 0.312 | 0.317 | 0.310 | 0.038 | 0.500 | 0.80 | 0.425 | S10PB175 |
| 10-32 | 0.175-0.3205 | 0.312 | 0.317 | 0.310 | 0.038 | 0.500 | 0.94 | 0.425 | S10PB320 |
| 1/4-20 | 0.020-0.280 | 0.386 | 0.391 | 0.384 | 0.058 | 0.625 | 1.03 | 0.505 | S25PB280 |
| 1/4-20 | 0.280-0.500 | 0.386 | 0.391 | 0.384 | 0.058 | 0.625 | 1.26 | 0.505 | S25PB500 |
| 5/16-18 | 0.020-0.280 | 0.484 | 0.489 | 0.482 | 0.062 | 0.750 | 1.18 | 0.570 | S31PB280 |
| 5/16-18 | 0.280-0.500 | 0.484 | 0.489 | 0.482 | 0.062 | 0.750 | 1.41 | 0.570 | S31PB500 |
| 3/8-16 | 0.020-0.280 | 0.562 | 0.569 | 0.560 | 0.088 | 0.875 | 1.27 | 0.605 | S37PB280 |
| 3/8-16 | 0.280-0.500 | 0.562 | 0.569 | 0.560 | 0.088 | 0.875 | 1.49 | 0.605 | S37PB500 |
All Dimensions Shown In Millimeters
| d | e | H | D | E | B | L | L2 | ||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Grip Range | Hole Size | Body Diameter Max. | Head Height Ref. | Head Diameter Ref. | Overall Length Ref. | Installed Length Ref. | Product Code | |
| Min. | Max. | ||||||||
| M6x1.0 | 0.50-7.10 | 9.80 | 9.93 | 9.76 | 1.50 | 15.9 | 26.2 | 12.8 | SM6PB7.10 |
| M6x1.0 | 7.10-12.70 | 9.80 | 9.93 | 9.76 | 1.50 | 15.9 | 32.0 | 12.8 | SM6PB12.70 |
| M8x1.25 | 0.50-7.10 | 12.29 | 12.42 | 12.25 | 1.57 | 19.0 | 30.0 | 14.5 | SM8PB7.10 |
| M8x1.25 | 7.10-12.70 | 12.29 | 12.42 | 12.25 | 1.57 | 19.0 | 35.8 | 14.5 | SM8PB12.70 |
| M10x1.50 | 0.50-7.10 | 14.27 | 14.15 | 14.23 | 2.24 | 22.2 | 32.3 | 15.4 | SM10PB7.10 |
| M10x1.50 | 7.10-12.70 | 14.27 | 14.15 | 14.23 | 2.24 | 22.2 | 37.8 | 15.4 | SM10PB12.70 |